METACON anchor couplings with tapered thread

Anchor coupling are installed at the ends of reinforcing bars and are used for anchoring reinforcing bars in reinforced concrete structures. The anchor system is used at the end of pillars and bars.

Price on request

Options:

12 mm — 40 mm

Order

Technical specification
Dimensions

Available in different sizes 12 mm – 40 mm
Manufactured in 2 versions (ordinary and shortened)
Carry full tensile strength affecting the steel bar when anchor is against the concrete or construction steel
Ensure full-strength of reinforcement connection and main reinforcement
Carry full tensile strength affecting the steel bar when anchor is against the concrete or construction steel
Significantly accelerate and facilitate the process of reinforcement placement
Easily-assembled, no need for special tools (aside torque spanner) or specially-qualified workers
Comply with requirements of main construction standards

Dimensions of METACON A-type anchor connections

Nominal diameter of bars d s, mm	Coupling length L +2/-2, mm	Coupling outer diameter ØD +2/-2, mm	Tightening torque, Nm, not less	Labeling Couplings
12	19	44	40	МС12A
14	21	49	80	МС14A
16	24	54	120	МС16A
18	29	64	150	МС18A
20	35	64	180	МС20A
22	37	74	220	МС22A
25	40	79	270	МС25A
28	42	89	270	МС28A
32	45	96	300	МС32A
36	52	104	300	МС36A
40	57	109	350	МС40A

Dimensions of METACON As-type anchor connections

Nominal diameter of bars d s, mm	Coupling length L +2/-2, mm	Coupling outer diameter ØD +2/-2, mm	Tightening torque, Nm, not less	Labeling Couplings
12	19	34	40	МС12As
14	21	34	80	МС14As
16	24	34	120	МС16As
18	29	39	150	МС18As
20	35	39	180	МС20As
22	37	44	220	МС22As
25	40	54	270	МС25As
28	42	54	270	МС28As
32	45	74	300	МС32As
36	52	74	300	МС36As
40	57	94	350	МС40As