Designed to connect steel bars of different diameter where at least one of them may freely rotate and move in axial direction. Reducing compression couplings may be pressed having gaps or without them.
Переходные обжимные муфты могут быть опрессованы с промежутками и без.
12 mm — 40 mm
Dimensions of METAPRESS reducing compression couplings
| Diameter of connected steel bar, d max / d min, mm | Coupling length before pressing, mm (with gaps) | Кол-во обжимов (по ½ длины) |
Coupling length before pressing (no gaps) | Number of pressings (½ length) |
| 40/36 | 216±2,0 | 5 | 180±2,0 | 5 |
| 40/32 | 192±2,0 | 4 | 160±2,0 | 4÷5 |
| 40/28 | 168±2,0 | 4 | 140±1,5 | 4 |
| 36/32 | 192±2,0 | 3 | 160±2,0 | 3 |
| 36/28 | 168±1,5 | 3 | 140±1,5 | 3 |
| 36/25 | 150±1,5 | 3 | 125±1,5 | 3 |
| 36/22 | 120±1,5 | 3 | 120±1,5 | 3 |
| 36/20 | 120±1,5 | 3 | 120±1,5 | 3 |
| 32/28 | 168±1,5 | 3 | 140±1,5 | 3 |
| 32/25 | 150±1,5 | 3 | 125±1,5 | 3 |
| 32/22 | 132±1,5 | 2 | 110±1,5 | 2 |
| 28/25 | 150±1,5 | 2 | 125±1,5 | 2 |
| 28/22 | 132±1,5 | 2 | 110±1,5 | 2 |
| 28/20 | 120±1,5 | 2 | 100±1,5 | 2 |
| 25/22 | 132±1,5 | 2 | 110±1,5 | 2 |
| 25/20 | 120±1,5 | 2 | 100±1,5 | 2 |
| 25/18 | 108±1,0 | 2 | 90±1,0 | 2 |
| 22/20 | 120±1,5 | 2 | 100±1,0 | 2 |
| 22/18 | 108±1,0 | 1÷2 | 90±1,0 | 1÷2 |
| 22/16 | 96±1,0 | 1÷2 | 80±1,0 | 1÷2 |
| 20/18 | 108±1,0 | 1÷2 | 90±1,0 | 1÷2 |
| 20/16 | 96±1,0 | 1÷2 | 80±1,0 | 1÷2 |
| 20/14 | 84±1,0 | 1÷2 | 70±1,0 | 1÷2 |
| 18/16 | 96±1,0 | 1÷2 | 80±1,0 | 1÷2 |
| 18/14 | 84±1,0 | 1÷2 | 70±1,0 | 1÷2 |
| 18/12 | 72±1,0 | 1÷2 | 60±1,0 | 1÷2 |
| 16/14 | 84±1,0 | 1÷2 | 70±1,0 | 1÷2 |
| 16/12 | 72±1,0 | 1÷2 | 70±1,0 | 1÷2 |
